1. Before the production of Wood Pellet Mill, it is necessary to check the operation of the equipment to see if the machine has the loose appearance of the screw, and whether the transmission parts are sensitive or not. To ensure that the machine does not have any abnormalities, then re-develop the motor and adjust the machine. Control, the moisture of the wood material must be less than 15% before it can be put into use.
2. The fineness of wood chips can be adjusted according to the orientation of the conditioning valve. The fineness of the particles should be checked in time. The amount of finely ground materials in the Wood Grinder will affect the milling, the adhesion will affect the looseness, the wood powder should be sieved early, and the particles will be too large. Influencing the output value. Wood chips processing raw materials are first selected from wood, pine, miscellaneous wood, rosewood, fir, bamboo, bamboo and other wood, and can also be used for that straw, straw, corn stalk, sorghum stalk and other fibrous stalk materials. the Lord.